Boot Fabric (GEOSEAL730)
PRODUCTS
APPLICATION
GEOSEAL730 (Boot fabric) consists of reinforced glass fiber with silicone rubber and can be used for
movement requirement of mechanical penetration items.
It is qualified for Ventilation, Flood, Radiation, and Compartment Pressurization seals for nuclear power plant.
GEOSEAL730 (Boot fabric) consists of reinforced glass fiber with silicone rubber and can be used for movement requirement of mechanical penetration items.
It is qualified for Ventilation, Flood, Radiation, and Compartment Pressurization seals for nuclear power plant.
PRODUCT PERFORMANCE
| Classification | Feature |
|---|---|
| Flood Seal | ≤0.01 gallon/min (21.7 psi) |
| Compartment Pressurization Seal | ≤0.001 cfm/ft · psid (5/10, 24/48 psid, 360°F) |
| Ventilation Seal | Yes |
| Radiation Resistance | 1×10⁶ Gy |
| Surface Burning Characteristics | Class ‘A’ (NFPA/IBC) |
STANDARD
| Classification | Feature |
|---|---|
| Color | Dark Blue |
| Main Component | Reinforced glass fiber and Silicone |
| Thickness | 0.031″ (0.79 mm) |
| Packing | 0.9 m × 30 m / roll (27 m²) |
| Service Temperature | 400°F (204°C) |
| Shelf life | 60 months |
| Dielectric Breakdown Strength | 9.4 kV/mm (ASTM D149) |
| Thermal Conductivity | 0.171 W/(m·K) (ASTM C518) |
| Halogen | Free |
| Asbestos | Free |
PROPERTIES
Uses
Sealing opening with movement for Piping, Duct.
Installation
Clean and dry the penetration surfaces.
Design and cut the boot. Fix the boot with steel plate, screw, clamp, sealant.
*In case of nuclear power plant, inner sleeve, ceramic fiber, and high density grout are required as per detailed installation drawing.
Storage
Avoid direct sunlight and store it in the range of 5℃ to 60℃ at a well-ventilated dry place
Caution
Be careful not to be torn the product
*The data is for information purposes only, not available for design data.